INVICTA Mirus PRO differs from INVICTA PRO in the following ways:
  • The headphone module is removed and two ESS SABRE 9028PRO DAcs are added to the back-panel XLR and RCA outputs. This allows a total of eight ES9028PRO channels for each stereo output. The THD and noise are thereby improved even further than on the INVICTA.
  • Upgrade your MIRUS to MIRUS PRO
The second generation INVICTA and INVICTA Mirus are hardware and firmware upgrades to the existing first generation INVICTA. But the good news is that the firmware to support DSD and the higher sample rates is compatible with first generation INVICTAs. (The firmware upgrade also enables the Apple Remote Control on the first generation INVICTAs) Dynamic ESS Sabre DAC Implementation Featuring the Sabre ES9028PRO Audio DAC circuitry with the latest Hyperstream technology
  • The ESS Sabre Pro series DAC is the world’s highest performance 32-bit audio DAC solution.
  • 2 ESS Sabre 9028PRO chips are used for precise conversion..
Exceptional Value
  • Engineered with more conveniences than a standard DAC
  • Adaptable for home use or in the recording studio.
  • Designed by the chassis designers at IMWorks, and Resonessence engineers intimately familiar with the exceptional ESS Sabre DAC. Designed, produced, and manufactured in Canada.
  • Provides endless hours of high-fidelity audio playback.
  • Minimal amounts of noise and distortion and accurate frequency response
Flexible I/O
  • SD card reader for seamless high-resolution sound enjoyment without a computer. No computer, no noise added into the loop.
  • RCA + XLR analog outputs.
  • High-speed USB, Toslink, BNC, AE5.
  • Supports all major audio inputs and outputs
  • Two headphone amplifiers that deliver pristine sound quality.
 

Specification GeneralValueUnitsNotes
Width 22.0 (8.66) cm (in)  
Depth 28.2 (11.10) cm (in)  
Height 5.0 (1.97) 4.4 (1.73) cm (in) cm (in) Including feet Without feet
Weight 2.9 (6.4) kg (lb)  
Operating Voltage 110 – 130 220 – 250 V AC 60Hz, 115v setting 50Hz, 230v setting
Fuse Rating 115v 500 mAmp Slow Blow, 250V, 5mm x 20mm
Fuse Rating 230v 250 mAmp Slow Blow, 250V, 5mm x 20mm
Power Consumption 30 Watts  
SD Card File Format DSF, DFF, FLAC, WAV, AIFF   Up to 384kS/s, 24bit
XLR Output
Amplitude 4.6 ±5% Vrms At 0dB volume
Impedance 78 ±1% ohm  
Distortion + Noise < -114< 0.0002 dB % 1kHz
Dynamic Range > 130 dB A-weighted
Frequency Response < 0.25< 1.0< 3.0 dB dB dB at 20kHz 44.1kS/s at 50kHz 192kS/s at 80kHz 192kS/s
RCA Output
Amplitude 2.3 ±5% Vrms At 0dB volume
Impedance 39 ±1% ohm  
Distortion + Noise < -114< 0.0002 dB % 1kHz
Dynamic Range > 125 dB A-weighted
Frequency Response < 0.25< 1.0< 3.0 dB dB dB at 20kHz 44.1kS/s at 50kHz 192kS/s at 80kHz 192kS/s